Autoclave, Vertical (Semi-Automatic), Double Wall

Semi-Automatic Autoclaves has unique pedal free design. It has microprocessor based PID controller with dual display for Temperature& Time. Fully SS 304 Construction. Reduced loading height. It has Vacuum Breaker to remove air packets in the chamber. Microprocessor based PID controller with dual display for Temperature& Time.Specially designed heater for optimum chamber usage.Over heat Auto shut down at 137°C.

Technical Specification

Parameter	Range
Capacity (Ltrs)	35	75	111
Chamber Dimension (mm)	300 x 500	400 x 600	450 x 700
Operating Pressure( kg / cm2)	1.2/2.1	1.2/2.1	1.2/2.1
Operating Temperature (°C)	121 / 134	121 / 134	121/134
Control	Digital	Digital	Digital

Autoclave, Vertical (Fully Automatic)

 Fully Automatic Autoclaves are provided with a very unique Flexible Load Sensor which enables the user to place the load sensor anywhere in the chamber. This can be placed in the Flask, Petri dish, Linen or any load. This enables the user to track that desired temperature is achieved in the load or not.Microprocessor based precise controlling.Autoclaves are provided with high quality food grade Silicon Gasket which ensures longer durability sealing under the pressure.Fully Automatic Autoclave provides the user option to select fast cooling or slow cooling depending on the load configuration.This system enables you to lift the lid very easily and safely. It also reduces the loading height. This allows the user to lift the lid by only 3 to 4 mm. These are robustly built with the latest welding technique which gives much higher working pressure and test pressure than any other Autoclave in its category. Robustly built chamber is capable of providing working pressure of 20 PSI and Test pressure of 60 PSI.

Technical Specification

Parameter	Range
Capacity (Ltrs)	35	52	75	111	178
Chamber Dimension (mm)	300 x 500	350 x 550	400 x 600	450 x 700	550 x 750
Operating Pressure ( kg/cm2)	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1
Operating Temperature (°C)	121 / 134	121 / 134	121 / 134	121 / 134	121 / 134
Sterilization Time (min)	0-99	0-99	0-99	0-99	0-99
Control	Digital	Digital	Digital	Digital	Digital

Autoclave, Portable (Steam)

Semi Automatic Portable Steam Autoclave can be used in Dental Clinics / Day Care Centres, R & D Centres, Laboratories Etc.SS Seamless die pressed deep drawn chamber. Microprocessor Digital temperature controller cum timer. It has food grade silicon rubber gasket for better durability.

Technical Specification

Parameter	Range
Capacity (Ltrs)	6	12	21
Chamber Dimension (mm)	200 x 200	250 x 250	300 x 300
Operating Pressure ( kg / cm2)	1.2/2.1	1.2/2.1	1.2/2.1
Operating  Temperature (°C)	121 / 134	121 / 134	121 / 134
Sterilization Time (min)	0-99	0-99	0-99

Autoclave – Table Top Front Loading

Table Top Frontloading Sterilizer / Autoclave. It has fast cycle time with Digital timer for Wet & Dry Cycle. Auto drain of water to reservoir tank after cycle completion. Completely automatic & with error message. Seamless chamber. Digital Pressure Display & also Analogue pressure display. Feasibility to take out instruments from chamber even after electricity fails

Technical Specification

Parameter	Range
Capacity (Ltrs)	35	52	75	111	178
Chamber Dimension (mm)	300 x 500	350 x 550	400 x 600	450 x 700	550 x 750
Operating Pressure ( kg / cm2)	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1
Operating Temperature (°C)	121 / 134	121 / 134	121 / 134	121/134	121/134
Sterilization Time (min)	0-99	0-99	0-99	0-99	0-99
Control	Digital	Digital	Digital	Digital	Digital

Autoclave, Horizontal (Steam)

Horizontal Steam Autoclaves are available with semi automatic operation or microprocessor based fully automatic operation. It has high pressure high vacuum option and low water level. It has pressure switch control.

Technical Specification

Parameter	Range
Capacity (Ltrs)	150	175	235	180	430
Chamber Dimension (mm)	400 x 1200	500x 900	500 x 1200	450×900	600×1200
Operating Pressure ( kg / cm2)	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1	1.2/2.1
Operating Temperature (°C)	121 / 134	121 / 134	121 / 134	121 / 134	121 / 134

Balance, Analytical

Analytical balances are an extremely accurate laboratory balance created to precisely measure the mass of an object. It has customized, large, attractive LCD with multiparameter display illuminated by white backlite.

Technical Specification

Parameter	Range
Capacity (g)	40	80	160	230	300
Readability (g)	0.0001	0.0001	0.0001	0.0001	0.0001
Repeatability (±) (mg)	0.1	0.1	0.2	0.2	0.2
Linearity (±) (mg)	0.2	0.2	0.4	0.4	0.4
Pan Size (mm)	100	100	100	100	100

Also Available without Internal Calibration.

Balance, Precision

High Precision Balances incorporate advanced Electro Magnetic Force Compensation (EMFC) technology to provide unmatched accuracy and reliability, coupled with unique ADC circuit with inbuilt temperature compensation to offer a very high stability upto a resolution of 6 million counts.

Technical Specification

Parameter	Range
Capacity (g)	1500	2200	3100	600/3000
Readability (g)	0.01	0.01	0.01	0.01/0.1
Repeatability (±) (mg)	0.01	0.02	0.02	0.02/0.2
Linearity (±) (mg)	0.02	0.03	0.03	0.03/0.3
Pan Size (mm)	165 x 175	165 x 175	165 x 175	165 x 175

Also Available without Internal Calibration.

Balance, Semi-Micro

Semi-Micro Balance has excellent performance, delivering accurate results within the shortest possible time. Large draft shield chamber, gives more space to the user, samples can be easily placed on the pan & also it gets accustomed to the interior temperature.

Technical Specification

Parameter	Range
Capacity (g)	80	100/160	60/220	80/220	220
Readability (mg)	0.01	0.01/0.1	0.01/0.1	0.01/0.1	0.01
Repeatability (±) (mg)	0.02	0.02/0.1	0.02/0.1	0.02/0.1	0.03
Linearity (±) (mg)	0.04	0.05/0.2	0.04/0.2	0.04/0.2	0.07
Pan size (mm)	Ø 80

Balances, Density

Density Balance is available in 2 types one to be mounted on the pan and the other type is with attachment for weigh below the balance. It density weighing pan assembly, stainless steel base for beaker, glass beaker, optional sinker for testing materials having density less than water. It has the facility for programming density of liquid (other than water) and temperature of water.

 Technical Specification

Parameter	Range
Range	0.1 mg – 300g 1mg – 1000g
Response time	3-5 seconds
Operating Temperature	10 to 45 deg C

Balance, Table Top

Table Top Scales incorporate high quality load cells. It has multiple weighing units, Gram, Kilo gram, carat, litre, pound. Piece counting facility, up to 25 different types. Storage of weights in memory and printing, up to 100 weights.

Technical Specification

Parameter	Range
Capacity (Kg)	15	30	30	35	30	35
Readability (g)	0.1	0.1	0.2	0.1	1	2
Linearity (±) (g)	0.2	0.2	0.4	0.2	2	5
Pan Size (mm)	225 x 300	225 x 300	225 x 300	225 x 300	225 x 300	225 x 300

Balance, Platform

Platform Balance has bright LED display. Indicator housed in a sturdy metal enclosure. Multiple functions: Parts counting, accumulation, net/gross. Overload & shock load protection.

Technical Specification

Parameter	Range
Capacity (Kg)	60	100	300	450	600	1 ton
Readability (g)	0.5	10	20	10	50	100
Pan Size (mm)	400×400	600×600	600×600	600 x  600	600×600	1000×1000

Bacteriological Incubator

Double wall chambers inner made of Stainless Steel and outer of Mild Steel sheet duly powder coated with 2.5″ thick glass wool insulation. Temperature is controlled by an imported thermostat, and working temperature ambient +5°C to 80°C with an accuracy of +/- 1°C and without thermometer. Micro processor based Digital Temperature Controller.

Technical Specification

Parameter	Range
Capacity (L)	28	45	95	125	225	325
Chamber Size (L x B x H) (mm)	300 x 300  x 300	350 x 350 x 350	450 x 450 x 450	450 x 450 x 600	600 x 600 x 600	600 x 600 x 900
No. of  Trays (Al. & SS)	2	2	2	3	3	3
Watts	250	250	250	500	500	500

B.O.D. Incubator/ Cooling Incubator

The cooling incubator has both cooling and heating functions, the lowest temperature can reach -10°C, the temperature stabilization time is short, and the temperature control precision is high. For the storage of culture media, serum, medicines, microbial culture, environmental testing, etc. It provides two options: colorful touch screen controller and LCD controller. The key electrical components are equipped with over-current, over-temperature, overload and other safety protection to prevent accidental equipment. With reservation and timing functions, there is no need to wait, which effectively improves the efficiency of the experiment. Breakdown message provided: When the instrument breakdown, the message will shown on the screen to help operator clearly check. It can be equipped with RS232 data interface, which can realize remote control of the machine through software.

Technical Specification

Parameter	Range
Capacity (L)	68	120	252	495
Temperature Range	-10 – 80℃
Resolution	0.1℃
Timing Range	1 – 5999 mins.
Shelves	2(10)	3(14)	3(16)	4(16)

Biosafety Cabinet

Biological Safety Cabinet is designed to provide personnel protection from harmful agents inside the cabinet; product protection to avoid contamination of the work, experiment, or process; environmental protection from contaminants contained within the cabinet. Provided with motorized front window. Includes ULPA filter life and UV life indicator. Automatic air speed adjustable with filter block and with memory function in case of power-failure. The work area surrounded by negative pressure; it can ensure maximum safety in work area. Supplied with audio and visual alarm (filter replacement, window over height, abnormal air flow velocity, etc). Provided with remote control. All functions can be realized with it, making the operation much easier and more convenient. There is an Interlock function for UV lamp and front window; UV lamp and blower, fluorescent lamp; blower and front window. Provided with foot switch.

Technical Specification

Parameter	Range
External Size, mm	1100 x 775 x 2250	1300 x 775 x 2250	1500 x 775 x 2250
Internal Size, mm	940 x 600 x 660	1150 x 600 x 660	1350 x 600 x 660
UV Lamp	30W x 1	30W x 1	40W x 1
Inflow Velocity	0.53±0.025 m/s
Downflow Velocity	0.33±0.025 m/s

Centrifuge, Compact

 Compact model for routine work in medical and industrial laboratories has digital speed indicator and 0–60-minute digital countdown timer. It has stepless speed regulator. Safety Lid interlock to prevent cover opening during centrifugation. Wide choice of Swing out / Angle rotors and reduction adaptors.

Technical Specification

Parameter	Range
Max.  Speed, rpm	4400
Max. RCF, g	2350
Max. Capacity, ml	200
Power Supply	220-240 Volts 50 Hz. Single Phase

Centrifuge, Micro

 Micro Centrifuges are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc. Provided with automatic rotor identification, ensures operator safety, easy to clean stainless steel centrifuge chamber. Includes brushless induction motor with variable frequency drive. The models are microprocessor controller with digital display with stable speed output even under unstable voltage conditions. Featured with smooth & soft start, low sample temperature rise, Inverter fault detection with auto shutdown. Provided with safety lid interlock to prevent lid opening during centrifugation, imbalance detection & centrifugation stop with display of error, dynamic brake for quick deceleration, motor overload protection, gas hinge to prevent door falling, emergency lid lock release, last set parameters recall (Useful for repetitive analysis) and wide variety of rotors & reduction adaptors.

Technical Specification

Parameter	Range
Max.  Speed	6000 rpm
Max. RCF	5070 g
Max. Capacity	400 ml
Digital timer range	0-99 min
Supply:	220-240 Volts 50 Hz. Single Phase

Centrifuge, Mini

Powerful and easy-to-use mini centrifuges are small enough so that each workstation can be equipped with a personal centrifuge. Extremely compact footprint saves valuable bench space. These models are featured with brushless DC (BLDC) Motor, settable speed (upto 6000 RPM) and time (upto 99 minutes). digital display can process upto 8 microtubes of 1.5/2 ml at a time, unique closed rotor reduces friction to ensure better airflow, low heat generation & whisper quiet operation. Provided with electronic brake for immediate stop on lid opening for user safety. Save time by doing quick runs by simple opening and closing the lid with user calibration facility. Selection of replaceable strip rotor & adaptors for 0.2 ml & 0.4/0.5 ml microtubes is provided.

Technical Specification

Parameter	Range
Rotor Capacity	8 place closed rotor for 1.5/2.0ml microtubes
Speed RPM / RCF (g)	6000/2000 g
Display	Digital
Noise Level	≤ 55 dB
Rubber suction pads	Yes
Rotors and Adaptors	8 Slot x 1.5/2.0 ml Closed Rotor PCR Strip Rotor (2 x 8 x 0.2 ml) Reduction Adaptors for 0.2 / 0.4 ml microtubes

Circulators

 Cooling/heating range provided for this model is -15°C to 120°C. Provided with Cooling achievable with optional immersion cooler. The product is simple, intuitive user interface: dial and two function buttons, with clear, bright 4 digit LED display. Includes visual alarm and low-liquid detection. Suitable for 2 point user calibration and provided with 3 temperature pre-sets.

Technical Specification

Parameter	Range
Stability (DIN 12876) @70ºC	0.05±ºC
Uniformity (DIN 12876) @70ºC	0.1±ºC
Setting resolution	0.1ºC
Display	4 digit LED
Timer function	1 minutes to 99 hours 59 minutes
Maximum flow	16L/min

Circulating Bath, Refrigerated

Consists of two capacities are supplied assembled as ready to use kits, complete with accessory hosing, clips and connectors as standard.Choice of two models, temperature range -30°C to 150°C (model dependent). Active cooling through the whole temperature range is included. The models are featured with true energy saving of up to 80% against standard compressor units, Built in to the highest specifications. Thermostat and chiller work in harmony, neither will operate alone, eliminating any danger of overheating or freezing.

Technical Specification

Parameter	Range
Capacity (Ltrs)	4.5	5.5
Temperature range	-20 to 100ºC	-30 to 150ºC
Temperature stability	0.05ºC	0.02ºC
Refrigerant	R290	R290
Flow rate (max)	17  L/min	14 – 22 adjustable
Cooling power (typical) (@ 20°C)	250	450

Colony Counter, Digital

Digital Colony Counter offered is compatible with pressure-sensitive counting. Pressure can be adjusted, provided with audible confirmation, choice of light or dark background. Simply place the Petri dish on the electronic pressure pad and touch the dish with a felt tip pen to mark each colony. Bright white energy saving LED lighting, average count facility, with antimicrobial protection, connectivity to printer or computer. Supplied with two Wolffhuegel graticules and dish centering adapters to facilitate use with 50mm to 90mm dishes. A choice of magnifiers and a printer are available as optional accessories.

Technical Specification

Parameter	Range
Digital Display	3 digit LED
Lighting	White LED
Magnifier glass	1.7x and 3x (option)
Counter	0 to 999
Petri dishes	Dia. 50 to 90 mm
Dimensions (W x D x H)	310 x 300 x 140 mm
Power Supply	120-230 V, 50/60 Hz, 70W

Colony Counter, Digital, (economic version)

 Digital Colony Counter is designed for quick and accurate counting of bacterial and mould colonies in petri dishes. Featured packed and easy to use, this is an indispensible bench top tool for busy microbiologist. It is designed for rapid and accurate counting of bacterial and mould colonies. Simply place the petri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and an audible tone confirms each count made.

Technical Specification

Parameter	Range
Display	3 Digit, 7-Seg. LED	4 Digit, 7-Seg. LED		6 Digit, 7-Seg. LED
Max. Counts	999	9999	999999
Dish Size	Dish Size
Magnification	x 1.7 Surface Magnification
Power	230 V ± 10% AC, 50 Hz,

CO₂ Incubator

CO₂ incubators are used to culture cells to provide it with the optimum temperature, moisture (sterile environment) and to maintain optimum pH under a CO₂ atmosphere. The model is featured with CO₂ concentration Restoration Speed. Provided with polished stainless-steel chamber, rounded corners for easy cleaning. Adjustable shelves. Microorganism filter fixed at Inlet provides 99%filtration of bacteria and dust (O<0.3um) and supplies pure CO₂ into the incubator. Independent audio-visual temperature limiting alarm system is fitted. Alarm function for temperature difference, CO2 over concentration and concentration difference, door open time, UV working status is included.

Technical Specification

Parameter	Range
Chamber Volume (L)	80	150
Sensor	Infrared CO2
Heating Method	Air-Jacketed, PID Control
CO2 Range	0~20% V/V
CO2 Control resolution	± 0.1% (IR sensor)
Temperature Range	+5 to 55°C
Humidity Method	Natural vaporization > 95%
Shelves	2	3

Deionizer (Type I)

 High purity ultrapure water system with capacity 10L/H to 150L/H. It is widely used in domestic and foreign laboratory. Sample pretreatment, eg. Reagents preparation, laboratory washing and tissue cleaning. Conventional physical and chemical analysis experiment, eg. Toxicity test, quantitative analysis of trace element, buffer solution.

Technical Specification

Parameter	Range
Process	Single stage RO	Double stage RO
Output of pure water	≥10L/H
Output of ultrapure water	≥1-1.5L/min
Resistivity @25℃ (type 1 water)	18.25MΩ.cm
Conductivity @25℃(type 3 water)	≤10μs/cm	≤5μs/cm
TOC	10ppb
Absorbance	≤0.001
Reactive silica	<0.01ppm
Heavy metal	<0.01ppm

Deionizer (Type II)

 Type II pure water is an essential part of creating chemical reagents, microbiological buffers and media that are consistently pure. It is also used for glassware washing, and as feed water of autoclaves, laboratory dishwasher and water baths. Conventional physical and chemical analysis experiment, like toxicity test, quantitative analysis of trace element, buffer solution.

 Technical Specification

Parameter	Range
Process	Single stage RO	Double stage RO
Output of type III pure water	≥10L/H
Output of type II pure water	≥1-1.5L/min
Resistivity @25℃ (type 2 water)	10-16 MΩ.cm
Conductivity @25℃(type 3 water)	≤10μs/cm	≤5μs/cm
TOC	20ppb
Absorbance	≤0.001

Deionizer (Type III)

The type III water machine is the economic model for users which only need pure water for chemical & physical inspection, analysis resolution preparation and laboratory clean water of instruments. The outlet water conductivity is from 1-10μs/cm, which meet the type III water quality. It is widely used in conventional chemical physical test and Cleaning pure water for instruments in lab.The machine will automaticallybe producing and flushing, and provided with water shortage protection.Produce water conductivity is visible on the control panel.It equipped with pressure pure water tank to improve the delivery pressure. Using a metal housing, the device has a longer lifespan.

Technical Specification

Parameter	Range
Process	Single stage RO	Double stage RO
Output of type III pure water	≥10L/H
Conductivity @25℃(type 3 water)	≤10μs/cm	≤5μs/cm
PH	5.0-7.5
Oxidizabes	≤0.4mg/L
Evaporation residue	≤2.0mg/L

Dispensers

 Designed for safe, sturdy & stable dispensing directly from the bottle in the range of volumes up to 100 ml. Fast, precise, and reproducible volume locking mechanism on a clear scale. Reagent recovery function reduces reagent waste and prevents dripping when not in use 6 adapters to comfortably fit most laboratory reagent bottles. Adjustable aspirating tube for different bottle heights.High chemical compatibility with use of inert materials and glass/PTFE piston. Easy to disassemble and clean for periodic maintenance.

 Technical Specification

Parameter	Range
Volume Range (mL)	0.5-5	1.0-10	2.5-25	5.0-50	10-100
Graduation (mL)	0.1	0.2	0.5	1.0	2.0
Random Error	±10μL ±0.2%	±20μL / ±0.2%	±50μL / ±0.2%	±100μL / ±0.2%	±200μL / ±0.2%
Systematic Error	±25μL / ±0.5%	±50μL / ±0.5%	±125μL / ±0.5%	±250μL / ±0.5%	±500μL / ±0.5%

Drying Oven

These ovens are suitable for drying powder samples. Providing with heating from three sides (Left, Right and bottom) and uniform temperature distribution. These ovens offer less temperature uniformity.Includes digital temperature controller. The chamber is made of stainless steel. External cabinets are made of powder coated GI or MI sheet. Provided with Digital temperature controller with PT100 temperature sensor controls the temperature and keeps uniform throughout test cycle. Optional such as programmable timer w/ hold function, over temperature safety thermostat, RS232 PC interface, thermal printer interface, Data logging with PC interface can be supplied on request.

Technical Specification

Parameter	Range
Capacity (Ltrs)	28	45	95	127	226
Temperature	Ambient+10°C to 150°C
Temperature Accuracy	±2°C
Temperature sensor	PT100
Heating element	Resistance wire with ceramic beads
Insulation	Glass wool
Shelves	2 – 3 steel wire mesh shelves

Dry Block Heater

Dry block heating cooling system is specially designed to thermo stabilized materials at temperatures from –3°C to +150°C according to methods of analysis. Includes digital timer with sound alarm of 1 min to 99 h 59 min (increment 1 min). Provided with temperature calibration function and protective lid. Custom blocks are available on request (Interchangeable block for 2 x Ø 48mm tubes, depth 58mm, for 10 x Ø 13mm tubes, flat bottom, depth 30mm, 10 x Ø 16mm tubes, depth 56mm, 5 x Ø 29mm tubes, flat bottom, depth 40mm, 6 x Ø 25mm tubes, depth 40mm, 18 x Ø 12mm tubes, round bottom, depth 58mm, 23 x 1.5ml micro tubes).

Technical Specification

Parameter	Range
Heating block temperature range	+25 to +150°C
Heating block temperature control range	Ambient +5 to +150°C
Heating block setting resolution	1°C
Cooling block temperature range	–3 to +20°C
Cooling block temperature control range	Ambient -23 to ambient -5°C
Cooling block setting resolution	0.1°C
Display	LCD

Dry Bath Incubator

Dry bath incubator features precise temperature control resolution in a compact design to give you reproducible results. This microprocessor controlled device offers you flexibility to accommodate a variety of interchangeable heating blocks for your versatile applications. Microprocessor controlled incubation temperature and time. Compact design with stable operation. Rapid heat up, uniform heating, high stability, low energy consumption and noise. Simultaneous display of set temperature and time. Built in temperature calibration function. Aluminum blocks ensures even heat distribution, eliminating the possibility of heater burnout.

Technical Specification

Parameter	Range
Temperature Range	+5-100 °C
Temperature Stability@100°C	±0.5 °C
Block Temperature Uniformity	±0.3 °C
Heating Speed	≤15 min
Time Range	1 min~99 h 59 min or continuous

Fume Hood

Fume Hood is a kind of negative pressure ventilation system for protecting operator and laboratory environment. Room air flows inward from the front opening of the Fume Hood and is consistently ventilated by the extract blower. Therefore, contaminated fumes, vapors, toxic gasses, aerosol and corrosive substance which are probably generated during experiments could be prevented from spreading to the operator or into the laboratory room. In addition, the polluted air could be purified by the active carbon filter (optional) before exhausting through the duct. Includes UV lamp for sterilization, 9 levels adjustable air speed, motorized front window, height adjustable, microprocessor control system with LED display and with memory function in case of power-failure.

Technical Specification

Parameter	Range
External Size, mm (W x D x H)	1040 x 800 x 2200	1240 x 800 x 2200	1540 x 800 x 2200
Internal Size, mm (W x D x H)	820 x 670x  730	1020 x 670 x 730	1320 x 670 x 730
Air Velocity, m/s	0.3~0.8
Work Surface Height	850 mm
Max Opening	520 mm
Exhaust Duct	PVC, Standard length: 4 meters, Φ300mm

Freeze Dryer

 Microprocessor control & LCD touch display which can display drying curve, vacuum, condenser temperature., run time, ambient temperature. Pre-freezing function for samples. Large refrigerating capacity and slight noise of DANFOSS(SECOP) compressor with CFC-FREE refrigerant. Transparent drying chamber is safe and easy to observe. For water-based samples, the -55°C condenser is the perfect choice with effective cost.

Technical Specification

Parameter	Range
Dry Chamber Size (D*H)	Ф260 × 430mm	Ф260 × 430mm	Ф260 × 540mm
Total shelf area	0.12 m2	0.12 m2	0.08m2
Sample load capacity	1.2L	1.2L	0.8L
Condenser temp.	<-55°C (-80°C or even lower is optional)
Ice remove capacity	4 Kg/24h

Freezer, Chest Type

Structural design is chest type with outer body painted with steel board, inside is aluminium panel, top door is provided with key lock. One unit basket made of steel wire are convenient to store articles and four unit’s casters for easy handing. The control system includes Microprocessor-based temperature controller, temperature from -10°C to -25°C/-30°C/-40°C,can be set freely, Digital temperature display, delayed start and safe stop interval between restart and being terminated and audible/visual alarm for high or low temperature alarm, system failure alarm. The refrigeration system is Quick freezing switch to make fast cooling with good quality compressor and Germany EBM fan motor and the refrigerant is R134a, CFC free.

Technical Specification

Parameter	Range
Capacity (Ltr)	100	203		322		525
External size (W*D*H) mm	570×580×880	865×660×875		1120×745×875		1843×689×848
Internal size (W*D*H) mm	450×375×705	735×440×685		970×490×660		1701x689x848
Temperature	-10~-25°C
Power	87W		87W		120W		270W

Freezer, Upright type (-25°C)

 Ideal for long term preservation of virus, germs, vaccines, biological tissues and organs, special food, medicines, reagents etc. Exclusive environmentally-safe new refrigerating technology, keep the temperature more stable, highly efficient freezing, more uniformity.  Provided with hidden cooling coil evaporator, removable plastic-coated steel wire mesh. Includes branded compressor and EBM fan motor and with refrigerant such as R507, CFC free. The unit is microprocessor-based temperature controller, digital temperature display and easy to read. The operating security provided with high and low temperature alarms, sensor failure alarm, power failure alarm for 8hours, door alarm along with password protection function on temperature controller, in case of set parameters randomly.

Technical Specification

Parameter	Range
Capacity (Ltr)	150	268	278	328	450
External size (W*D*H) mm	519x600x1240	673x676x1630	659x600x 1694	673x676x 1886	655×780 x 1845
Internal size (W*D*H) mm	370x425x1013	508x519x1137	480x415x 1460	508x519x 1393	530x626x 1356
Setting Temp.	-10~-25°C

Freezer, Upright type (-40°C)

 Low temperature freezer offers a large capacity storage space with fast temperature performance. Integrated design of cold shelf and evaporator provides additional refrigeration efficiency. Includes an advanced Cooling System. Provided with precise microcomputer temperature control with digital temperature display. Designed with high operational security alarms with high and low temperature alarms, sensor failure alarm, power failure alarm for 8hours, door alarm and password protection function.

Technical Specification

Parameter	Range
Capacity (Ltr)	268	278	328	450
External size (W*D*H) mm	673x676x 1630	659x600x 1694	673x676x 1886	660×780× 1850
Internal size (W*D*H) mm	508x519x 1137	480x415x 1460	508x519x 1393	530×620×1350
Setting Temp.	-10~-40°C

Gas Generator, Nitrogen

Suitable as make-up gas at standard detection limits. Nitrogen generated on demand, as and when it is required. Constant and consistent supply, avoid running out of gas during analysis. Avoid contaminants entering system as result of changing over empty cylinders Catalyst chamber to remove hydrocarbons (as methane) to <0.05 ppm. Dedicated Precision compressor module available were house supply not available. Integrates seamlessly with other Precision units. Ultra-fast start-up time, quick to reach standard operating purity. Minimum maintenance with an annual filter change. The product is featured with compact, space-saving modular design.

Technical Specification

Parameter	Range
Gas Type	Nitrogen
Min Gas Flow	0cc/min
Max Gas Flow	1000cc/min
Hydrocarbon Content	<0.05ppm
Max Output Pressure	80psi/5.5bar
Max Purity	99.9995%
Application	GC
Catalyst Chamber	Available

Gas Generator, Dual source

Factory pre-set pressures and flows to meet exact demands of Dual Source Systems.  Multi- stage drying filtration to efficiently remove moisture and contaminants, providing a consistent quality of gas. Low impact on lab environment with low noise and heat emissions. Intuitive LED service indication. Featuring dual outlets (1 x nitrogen, 1 x air), the generator is precision engineered to reduce size as well as noise and heat emissions.

Technical Specification

Parameter	Range
Gas Type	Nitrogen
Max Gas Flow	16L/min
Max Output Pressure	80psi/5.5bar
Gas Type	Air
Max Gas Flow	67L/min
Max Output Pressure	110psi/7.58bar
Max operating temperature	30°C
Particles	<0.01µm
Phthalates	Phthalate & BHT Free

Glove Box, Compact

 The Compact Glove Box is designed specifically for use in hazardous situations where materials to be weighed must be contained. Four purging gas valves (two on the transfer chamber and two on the main chamber). White leveling tray for easy transferring of liquids. White ambidextrous Hypalon gloves for superior chemical and U.V. resistance. Pressure relief valve minimizes glove “fight back” and with replaceable H.E.P.A. and organic vapor canister filters.

Technical Specification

Parameter	Range
	Two gloves	Three gloves	Four gloves
Inner Dim., mm	710 x 580 x 740	1220 x 740 x 810	1524 x 740 x 810
Outer Dim., mm	1100 x 610 x 790	1600 x 790 x 860	1930 x 812 x 890
Top Opening, mm	432 x 585	610 x 1065	610 x 1370
Volume, Litres	306	730	912

Glassware Washer, Benchtop Model

Unit is featured with high degree of cleanliness. Adopt PLC microcomputer control technology. Standard printer and 7-inch color LCD touch screen. Complete protection functions included such as the door cannot be opened during operation to ensure safe use; dual temperature protection of water temperature and air temperature; power failure protection function; water seal design of drainage pipeline to prevent reverse flow of sewage; installed with leak-proof detection. Efficient drying system is installed.  Built-in HEPA high-efficiency filter to ensure the cleanliness of dry air.

Technical Specification

Parameter	Range
External Size (W x D x H), mm	980 x 740 x 870
Internal Size (W x D x H), mm	600 x 629 x 465
Inlet Pressure	0.3~0.8Mpa
Overall Power Consumption	6kw
Power Consumption-Water Heating	5kw
Power Consumption-Drying	3kw

Glassware Washer, Standing Model

Highly efficient cleaning system, designed with European reliable pump, optimized spray arm and nozzles, and self-cleaning program. Rapid and efficient drying system, designed with independent air heater, HEPA filter and drying process; water heating temperature can reach 99℃, while hot air-drying temperature can reach 120℃. The unit is with professional configuration design—stainless steel for corrosion resistance; reinforced glass window mounted to achieve a clear view on washing process. Featured with PLC touch screen control with preset 12 programs and 99 cutomized programs. Provided with safety protection—electronic security door lock to prevent unexpected door opening, water & drying air temperature dual control and equipped with emergency switch.

Technical Specification

Parameter	Range
Capacity	120L	220L	320L
Water Consumption/Cycle	17L	20L	22L
Inlet Water Pressure	0.3~0.8Mpa
Noise	≤50dB	≤55dB
Material	Internal material: SS316, Outer material: SS304

Heating Mantle

Heating Mantles available in a range of sizes to accommodate round bottom flasks from 50 to 1000 mL, constructed with a robust aluminium casing, making them tough and easy to clean. Controlled up to 450°C. Range of sizes available. Integrated clamp rod fitting to enable secure fitting of a standard clamp rod. Non-slip feet are also fitted as standard. For added safety, all units feature an emergency cut out which will automatically trigger in the event of a spillage.

Technical Specification

Parameter	Range
Capacity	1000 mL
Material	Aluminium
Temperature	450°C
Shape	Round
Wattage	380W
Dimensions (interior)	220 x 220 x 170 mm
For use with (Application)	Emergency cut out which will automatically trigger in the event of a spillage
Electrical Requirements	230V, 50 Hz

Heating Mantle, Digital Display

 Digital Display Heating Mantle is a table top device to accommodate flasks from 50 to 1000 ml maximum capacity, offers single channel heating mantle and temperature ranges from RT+20 to 250°C. It offers step less speed adjustment, uniform temperature, fast heating-up, safety and durability. Features anti-corrosion, age-resistant and PID single screen temperature controller. It adopts electronic temperature regulation heating mode.Adopts Nichrome wire heating element. Offers PT100 temperature sensor, with adjustable sensor rack and stainless rods. Equipped by anti-corrosion, age-resistant, durable and safe. Material used high quality aluminum silicate cotton.

Technical Specification

Parameter	Range
Capacity	1000 mL
Heating mode	Surface heat conduction
Work model	Continuous
Surface Max. temperature	450°C
Temperature range	RT+20 to 250°C
Outer shell	High quality aluminum silicate cotton
External dimensions	280 × 220 mm

Heating Mantle, Multi-Position

Multi position Heating Mantle are designed to heat between 3 and 6 round bottom flasks simultaneously. They are often used for distillation, extraction and reflux procedures, wherever heating of multiple flasks is required. Each heating mantle can be regulated with its individual built-in temperature controller. Maximum operating temperature of heating elements is 350°C.Vented housing and unique air flow ensures unit is cool to touch. These units include support rods and clamps.

Technical Specification

Parameter	Range
Capacity, ml	100	250	500	1000
No. of position	3 /6
Rating for 3 positions, W	300	450	600	900
Rating for 6 positions, W	600	900	1200	1800
Temperature	350°C

Homogenizers, Laboratory Stirrers

These are designed for homogenization, emulsification and dispersion and mixing of fluids at high speed. The user has a choice of selecting from AC Drive or AC/DC Drive with stepless speed regulations for continuous variation of speed as per requirements. Chuck to hold shaft up to 10 mm dia. fitted with PTFE grinding pestle (50 ml). These Homogenizers are also known as Laboratory Stirrers.

Technical Specification

Parameter	Range
Stirring Capacity (Ltrs)	8	20		35
Speed (rpm)	300-6000	300-5000		300-5000
Impeller Type	Saw Cutter
Impeller diameter, mm	30	40		60
Stirring shaft length, mm	250	480		480
Stirring shaft diameter, mm	8	12		12
Digital speed indicator	Optional
Motor	AC/DC 1/8 HP		AC/DC 1/4 HP		AC/DC 2/3 HP

Hot Plate, Glass Ceramic

LED screen display actual and accurate temperature. Maximum temperature up to 550℃. Separate safety circuits with safety temperature of 580℃. External temperature control is possible by connecting temperature sensor (PT1000) with an accuracy of ±0.2℃. Work plate provides excellent chemical- resistant performance and most efficient heat transfer. HOT warning flashes when the workplate temperature is above 50℃.

Technical Specification

Parameter	Range
Work plate material	Glass ceramic
Work plate dimension	184 x 184 mm
Temperature control accuracy	±10℃
Heating position	1
Overheating temperature protection	580℃
Heating temperature range	Room Temp.-550℃, increment 5℃
Temperature display accuracy	±1℃
Overheating temperature protection	580℃
Power / Heating output	1010 W /1000 W

Hot Plate, Metal

Digital hotplate designed for very accurate control of plate temperature. The excellent heat transmission of the robust aluminium top plate combined with state-of-the-art digital temperature control gives rapid heating and ensures very even temperature distribution across the whole of the plate. The easy-to-read digital display indicates both set and actual plate temperature and the encoder control allows rapid and accurate temperature selection. The “Hot” warning light will flash whenever the plate temperature is above 50ºC. An independent safety circuit protects against overheating.

Technical Specification

Parameter	Range
Work plate material	Al/Si alloy
Work plate dimension	160 x 160mm
Heater Power	700 W
Temperature control accuracy	±10℃
Max. plate temperature	325°C
Display resolution	1°C
Temperature variation across plate	±0.2 @ 37°C, ±1.0 @ 150°C
Temperature stability	±0.25 °C

Hot Plates, Large Capacity

These large rectangular shaped hotplates are ideal for heating many smaller vessels simultaneously, e.g. in educational use where lots of students require their samples heated at the same time. Choice of top plate material, metal or ceramic with large plate area ideal for heating multiple vessels. It can accommodate up to 30 x 100ml beakers.

Technical Specification

Parameter	Range
Plate material	Glass ceramic	Al/Si alloy
Plate dimensions, mm	300 x 500	300 x 500
Heated area, mm	250 x 450	300 x 500
Heater power, W	2250	1500
Max. plate temp. °C	375	300
Dimensions, mm (w x d x h)	520 x 360 x 130	520 x 360 x 130

Hybridization Incubator

Hybridization Incubator is a compact oven that features hot air convection technology and an incubator shaker. This feature ensures uniform and precise temperature control which is necessary for pre-hybridization or hybridization of membranes in blotting techniques. Designed with shaker base with adjustable speed, it is ideal for the washing stage of most hybridization procedures, thereby allowing optimization depending on application. Provided with durable stainless-steel body and double glass door design. Featured with microcomputer controller for precise temperature control and variable speed control.

Technical Specification

Parameter	Range
Sample Capacity	6 hybrid tubes
Hybrid tube size	35 × 240 mm
Temperature range	Ambient + 5°C – 100°C
Temperature Accuracy	± 0.5°C (at 37°C)
Rotational speed range	6-25 rpm ; Adjustable

Ice Flake Machine

These Ice Flakers are the most suitable Ice Flake Machines used in laboratories worldwide. With the use of international quality standard material and advanced manufacturing and designing technology. Highly reliable and durable flake ice makers. Standard models ensure output with 35°C air and 25°C water and incorporate anti-scale water filtration as standard. These machines are designed matching to the specific requirements of the customers. These units come with simple installation and require only connection to power supply, water and drain. Standard models ensure output with 35°C air and 25°C water and incorporate anti-scale water filtration as standard.

Technical Specification

Parameter	Range
Ice Flake output	25 to 196 kg / day or more
Temperature	-5°C to -8°C
Construction	Corrosion resistant stainless Steel
Cooling system	Water-cooling or Forced air cooling
Collecting Bin Capacity	Up to 40 KG
Refrigerant	R22A / R 404A

Kjeldahl Distillation Unit

Kjeldahl Apparatus is used to determine organic nitrogen and protein contents in chemical substance. This estimation is done by Kjeldahl digestion method. These units are widely used in food, environmental, urea and chemical industries. A full understanding of the kjeldahl nitrogen process is the key concept for correct designing of kjeldahl apparatus. These apparatuses are available with 3 or 6 mantle type heating units; each unit is fitted with individual energy regulator. All parts are fixed in a sturdy powder coated MS frame. Each unit can accommodate flasks with 300ml, 500mlcapacities. In order to experience you comfortable working process, we also supply a number of optional accessories such as glass ware, clamps, lead fume duct and condenser rack etc. From open type or hooded combination type, we construct the kjeldahl machine in any design our customers need.

Technical Specification

Parameter	Range
Capacity	300 or 500 ml	300 or 500 ml
Manifold	Unit of 3 tests	Unit of 6 tests
Heating system	Mantle type
Rating of each test	200 watts
Temperature	350°C

Kjeldahl Distillation and Digestion combined unit

Designed to determine protein, nitrogen and ammonia content. Each unit has 3 or 6 heating mantles with individual energy regulators, supporting rods and clamps. It is a combined unit of distillation and digestion units.

Technical Specification

Parameter	Range
Capacity	300 or 500 ml	300 or 500 ml
Manifold	Unit of 3 tests	Unit of 6 tests
Heating system	Mantle type
Rating of each test	200 watts
Temperature	350°C

Kjeldahl Digestion Unit, Automatic

These digesters are fully automatic and immediately ready to use, as they consist of an aluminum heating block, a lift for automatic sample handling, suction hood, test tubes, test tube rack and drip tray. The unit provides the operator with the ultimate technology that allows the laboratory technician to set up the analysis choosing from a library of 54 programs (30 pre-installed + 24 customizable), press START and walk away, boosting the lab productivity. Ease of loading and unloading make a pleasure to use when carrying out Kjeldahl analysis, and there is no need to handle the sample when the tubes are hot.

Technical Specification

Parameter	Range
Heating Place	8	12	20
Size of Tubes	250 ml	250/400 ml	250 ml
Digestion time	1 – 999 min
Temperature	Ambient to 450 °C
Time selection	1-minute steps
Control System	Microprocessor with LCD graphic display
Stability heating block temp.	± 0.5 °c
Set temperature	Digital readout in °C or °F
Temperature calibration	Automatic
Selectable ramps	Upto 4 per program

Laminar Air Flow Cabinet, Vertical

Laminar Flow Cabinet is a work bench or similar enclosure, which creates a particle-free working environment by taking air through a filtration system and exhausting it across a work surface in a laminar or unidirectional air stream. The laminar flow cabinet is enclosed on the sides and kept under constant positive pressure in order to prevent the infiltration of contaminated room air.

Technical Specification

Parameter	Range
External Size, mm	1300 x 750 x 2040	1800 x 750 x 2040
Internal Size, mm	1200 x 645 x 610	1700 x 645 x 610
Material	Main Body: Cold-rolled steel with anti-bacteria powder coating
	Work Table: 304 stainless steel
	Side and Front Windows: 5mm toughened glass anti-UV
HEPA Filter	99.999% efficiency at 0.3μm
Max Opening	430mm

Laboratory Mill

Laboratory Mill / Batch mill for 2 different grinding procedures. Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless-steel beater. This beater can be used for a Mohs hardness up to 6. Cutting grinding for pulverizing soft, fibrous materials with a cutting blade. Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet, useful volume 80 ml. For embrittlement of grinding materials with liquid nitrogen in the grinding chamber. Moist and gluey materials can be pulverized by adding water.

Technical Specification

Parameter	Range
Process Type	Batch
Operating Principle	Cutting / impact
Motor rating input	160W
Motor rating output	200W
Speed max.	28000 rpm
Feed grain size max.	10 mm
Circumferential speed max.	53 m/s
Useable volume max.	80 ml

Melting Point Apparatus, Digital

Used to determine the melting point of a substance. Provided with LCD touch screen. The melting curve can be recorded automatically. It can calculate average value of initial and final melting points automatically. Provided with RS 232 interface. It is widely used in chemical and pharmacy industry.

Technical Specification

Parameter	Range
Measuring range	RT~360°C	RT〜400°C
Resolution	0.1°C
Linear heating-up Rate	0.1°C~20°C/min
Temperature Accuracy	0.4°C(≤200°C), 0.7°C(>200°C)
Repeatability	0.3°C
Capillary Size	φ1.4mm (outside diameter),φ1.0mm(inside diameter), 80mm (height)

Melting Point Apparatus, Automatic

Automatic Video Recording for Continuous Monitoring and function to visualize real-time phase transition.  Video replay function to revisit past trials. 4 samples during each test. Standard capillary tube size diameter of 0.9~1.1mm and wall thickness: 0.10~0.15mm.Multi-user Identification, 8″ full color capacitive touch screen display and user interface based on Android platform.

Technical Specification

Parameter	Range
Display	8″ capacitive touch screen
Temperature range	Room Temperature – 400°C
Temperature resolution	0.1°C
Repeatability	0.2°C (heating rate: 0.20°C/min)
Accuracy	±0.4°C (<200°C), ±0.7°C (<300°C)
Heating rate	±0.4°C (<200°C), ±0.7°C (<300°C)
Standard capillary tube	Diameter: 0.9~1.1mm, Wall thickness: 0.10~0.15mm
No of samples	4 pcs/batch
User management	20
Communication ports	USB, RS232, Wi-Fi, Internet
Printer interface	Thermal and laser printer

Magnetic Stirrer with Hotplate

Economical general purpose hotplate stirrers designed with safety as well as performance in mind. The cast aluminum body is shaped for stability and helps deflect spills away from the controls and the user. The “Hot” warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion.

Technical Specification

Parameter	Range
Plate material	Glass ceramic	Aluminium/silicon alloy
Plate dimensions	160 x 160 mm	160 x 160 mm
Max. plate temperature	450°C	325°C
Stirrer speed, rpm	100 – 1500	100 – 1500
Maximum stirring capacity	15 L	15 L

Magnetic Stirrer with Hotplate, 3 Position

Three independently controlled stirring/heating positions are provided. Includes separate “Hot” warning lights for each plate. Features with powerful magnets for strong magnetic coupling. A space saving and economical unit with 3 independent heating/stirring positions in a footprint only 600 x 270mm. Easily accommodates 3 x 2 litre beakers. Unit only requires one power point and is ideal for quality control applications where multiple samples require simultaneous heating and stirring, under the same conditions. A “Hot” warning light for each plate will flash whenever its temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. The top plates area robust aluminum /silicon alloy, providing even plate temperature. Powerful magnets and motor give stirring speed upto1500rpm and volumes up to 15litres. Supplied complete with 3 x 25mm PTFE coated stir bars.

Technical Specification

Parameter	Range
Plate material	Al/Si alloy
Plate dimensions	160 x 160 mm
Max. plate temperature	325°C
Speed Range, rpm	100 – 1500
Heater power, W	3 x 700

Magnetic Stirrer with Hot Plate, Digital

Choice of robust aluminum or chemically resistant ceramic tops. Featured with advance safety features such as Flashing “Hot” warning light, spill proof design, independent safety circuit to protect against overheating.  Provided with microprocessor control for accurate temperature setting. Economical general purpose hot plate stirrers designed with safety as well as performance in mind. The cast aluminum body is shaped for stability and helps deflect spills away from the controls and the user. The “Hot” warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion.

Technical Specification

Parameter	Range
Plate material	Glass ceramic	Aluminium/silicon alloy
Plate dimensions	160 x 160 mm	160 x 160 mm
Max. plate temperature	450°C	300°C
Stirrer speed, rpm	200 – 1300	200 – 1300
Maximum stirring capacity	15 L	15 L
Control accuracy with probe °C	±0.5°C	±0.5°C

Binocular Research Microscope

Robust, ergonomically designed with stability having anti-mould and hard coated design. All objectives, eyepieces, optics & observation tubes are having anti-fungal treatment with universal infinity corrected optical system. Provided with DIN Semi-Plan Achromatic Objectives and DIN Plan Achromatic Objectives. It has high point wide-field eyepiece. It has right handed, co-axial, low positioned, Double plated mechanical stage. It provided with coaxial, coarse and fine focus adjustment knobs.

Technical Specification

Parameter	Range
Objectives	4X/0.1 WD 20mm, 10X/0.25 WD 6.5mm, 40X SL / 0.65 WD 0.6mm and 100X SL Oil / 1.25 WD 0.2mm
Eyepieces	WF 10X
Nosepiece	Quadruple/Quintuple inward facing nosepiece
Viewing Head	Sidentopf Binocular Head inclined at 30º & 360º rotatable
Inter-pupillary distance	50-75mm, with dioptric adjustment
Stage	Double plated mechanical stage 135mm x120mm
Focus Adjustment	Coarse range 25mm, Fine focusing range 2mm / rotation, each division 0.002mm with torque and focusing adjustment.
Condenser	Bright field Abbe Condenser N.A. 0.9-1.25
Illumination	6Volt 20W Halogen Lamp or LED Light source operated on 220 Volt / 50 Hz

Pathological Research Trinocular Microscope

These Microscopes quality assurance throughout the manufacturing process ensures demanding performance standards. Optical components in the viewing head and objectives are protected with an anti mould system to ensure proper performance in unusually hot and humid environment. Extra clarity and contrast is provided through our new high performance color corrected infinity optical system. Infinite corrected available in achromatic, semi-plan and plan objectives.

Technical Specification

Parameter	Range
Objectives	4x, 10x, 40x, & 100x oil
Eyepieces	WF 10x/20
Nosepiece	Inward Quintuple Nosepiece
Viewing Head	Sidentopf Trinocular Head
Inter-pupillary distance	50-75mm
Stage	Low Coaxial Mechanical Stage 135mm x 153mm
Condenser	N.A. 1.25 Abbe Condenser
Illumination	Koehler illumination, 6 Volts 30 Watts

Monocular Laboratory Microscope

These Microscopes are latest in design, precision engineered with the finest features. These Microscopes are provided with Detachable Mechanical Stage, Objective 100x Oil Immersion, Binocular Observation Head & Sub-Stage Illuminator 15Watt Lamp for (220V/110V).

Technical Specification

Parameter	Range
Objectives	Achromatic 4X – 10X & 40XSL
Eyepieces	5X-6X-10X-15X or 16X
Nosepiece	Quadruple nosepiece
Observation Head	45° inclined Monocular head rotatable through 360°
Stage	Fixed square stage 115 x 115 mm
Illumination	Plano-Concave 50mm adjustable mirror on gimble mount.

Binocular Laboratory Microscope

These microscopes are latest in design, precision engineered with the finest features. In full mould Thermocol Box or Wooden storing cabinet with lock & key. Supplied with Vinyl Cover, Duster, Cleaning Brush, Filter and Operating Manual. Detachable Mechanical Stage, Objective 100x Oil Immersion, Binocular Observation Head & Sub-Stage Illuminator 15Watt Lamp for (220V/110V). It has Quadruple nosepiece with accurate centering and positive click stops.

Technical Specification

Parameter	Range
Objectives	Achromatic 4X – 10X & 40XSL
Eyepieces	5X-6X-10X-15X or 16X
Nosepiece	Quadruple nosepiece
Observation Head	45° inclined Binocular head rotatable through 360°
Stage	Fixed square stage of 115mm and detachable graduated stage with slide manipulation up to 40x75mm
Illumination	Plano-Concave 50mm adjustable mirror on gimble mount. Interchangeable with sub stage illuminator 15W lamp 220/110V.

Student School Microscope

Student microscope is a low power, durable optical microscope typically sold in bulk for use in school science classes. The School Microscope is designed for younger students of elementary education. The primary lens was often mounted on a rotating platter so that different lenses could be rotated into the line of view. It meets the needs of Science teaching and demonstration to beginners at school level. Being light weight & handy, it helps carrying around and is simple to use, yet having features of a compound Microscope Precision Optical Glass Lenses and metal components are engineered for years of reliable performance.

Technical Specification

Parameter	Range
Objectives	Achromatic 10X
Eyepieces	Huygenian 10X and 15X
Observation	Monocular straight fixed tube.
Stage	Fixed square stage size 75 x 85mm with stage clips.
Illumination	Plano-Concave mirror diameter 25mm mounted on gimble mount.

Student Compound Microscope

Student microscope is a low power, durable optical microscope typically sold in bulk for use in school science classes. These Microscopes are latest in design, precision-engineered with finest features. The primary lens was often mounted on a rotating platter so that different lenses could be rotated into the line of view. Their operational functions can be carried out without any difficulty and provide excellent crisp clear image so that even advanced scientific studies are routinely possible.

Technical Specification

Parameter	Range
Objectives	Achromatic 10X & 40X.
Eyepieces	Huygenian 5X-10X-15X (any two) or Wide field 10X.
Nosepiece	Triple revolving nosepiece with accurate centering and positive click stops
Stage	Fixed square stage of 120x120mm with stage clips.
Illumination	Plano-Concave 50mm adjustable mirror on gimble mount.

Mixer, Rotating

Provided with adjustable speed. LCD display indicates speed and time. Material of tube holder and clip are stainless steel. Three clip sizes are selectable, suit for the tubes1.5ml, 15ml, 50ml.

Technical Specification

Parameter	Range
Speed Range	10~70rpm
Timing Range	1~1199min
Operation Mode	Continuous or Timing
Motor Type	DC motor
Power Consumption	40W
Power Supply	AC110/220V±10%, 50/60Hz

Moisture Analyzer

Moisture Analyzer offered with infra-red halogen technology. Built-in application program other than basic weighing ease your routine lab work with data storage of 1000 moisture determination results. Uniquely designed circular halogen Lamp and reflectors ensures utmost rapid heating, shorten the measurement time. This can display and print statistics for the last 9999 measurements based on each Method or Batch making this ideal intelligent instrument for R&D and Production both. Method Wise storage allows the user to store 25 moisture determination results in each method, user can store such  40 methods. Batch wise storage allows user to create 100 batches & store maximum 1000 data with no restriction on the data storage per batch. Multiple Units of measurement results %M, %D, %R (ratio), Gm/Lt, %M Atro, %D Atro make it most convenient for  each user.

Technical Specification

Parameter	Range
Max. Sample weight, g	50	40	120	200
Readability	0.001 g
Temperature range	30º C to 175º C (Optional 250º C)
Temperature increment	1º C
Heating Profile	Standard, Gentle, Rapid, Steps, High Temperature
Batch Memory	100

Muffle Furnace

Muffle furnace is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. It has Program controlling temperature. Heating wire is set in four sides of the furnace, anti-corrosion, prevent contamination. Special insulation design, low shell temperature. SCR control, PID parameter self-setting. Over-temperature alarm; Power off when over-temperature/over-load. Manual or automatic switch without interference. Built-in parameter password control function.

Technical Specification

Parameter	Range
Capacity	6 L	8 L	16 L	30 L
Max. Temperature	1000°C
Temp. Accuracy	±1℃
Heating Rate	0-30℃/min
Rising Time(Empty)	30 minutes
Heating Element	Nickel chromium alloy wire

Oil Bath

Oil bath is a type of heated bath used in a laboratory, most commonly used to heat up chemical reactions. It has automatic protection for overheating. Main body is made of steel plate with Baking varnish;Internal is imported stainless steel. Advanced recycle pump system ensures good evenness of temperature.

Technical Specification

Parameter	Range
Temperature Range	RT~300℃
Temperature fluctuation	≤1℃
Circulation Pump Flow Rate	6L/min
Temperature control precision	≤1℃
Heater power	2000 W

Orbital Shaker Incubator

Orbital Shaker–Incubator for biotechnological and pharmaceutical laboratories is a professional category equipment designed for cultivation of microorganisms and eukaryotic cells including animal, plant and insect cells. It is also possible to cultivate thermofilic bacteria in shaker-incubator.Shaker is equipped with a direct-drive mechanism for platform motion. It provides reliable and stable operation for the long term experiments needed for cell growth. Shaker–Incubator provides smooth or intensive mixing in flasks installed on the platform.Built-in noiseless thermoresistant brushless fan provides precise temperature distribution inside the chamber (adjustable for up to +80°C). The inner chamber is made of stainless steel. State–of–the–art motor, newest thermal insulation materials, soft-start of the platform motion and temperature PID–control decrease the energy consumption and make the Shaker–Incubator highly energy efficient despite its relatively large size.

Technical Specification

Parameter	Range
Temperature setting range	+25°C… +80°C
Speed control range	50–250 rpm (increment 10 rpm)
Temperature setting resolution	0.1°C
Temperature stability	±0.5°C
Orbit	20 mm
Maximum continuous operation time	30 days
Digital time setting	1 min–96 hrs / non–stop (1 min increment)

PCR Thermal Cycler

Polymerase Chain Reaction amplifies nucleic acids in vitro, emulating the natural DNA replication process. PCR amplification is achieved using a thermal cycler by raising and lowering the temperature of samples in a thermal block in cycles of programmed steps. Thermal Cycler uses advanced peltier technology to achieve precise temperature control and fast ramp rates with minimal over- and under-shoot for process speed and accuracy.

Technical Specification

Parameter	Range
Sample Capacity	24 x 0.2 mL	18 X 0.5 mL
Temperature Range	4-99°C
Maximum Heating Rate	5.0°C / sec	4.0°C / sec
Maximum Cooling Rate	4.0°C / sec	3.0°C / sec
Hot Lid Temperature Range	30-110°C (Adjustable, Default 105°C, Automatic Hot-Lid)

Polarimeter, Digital Automatic

Provided with LCD Display. Suitable to store three times results and calculation of average values can be done. Dark-colored sample is measured. Equipped with Photoelectric test and automatic servomechanism control.

Technical Specification

Parameter	Range
Measuring Range	±45°(optical rotation) /±120° Z(sugar)	±45°(optical rotation)
Wavelength	589nm	589nm
Readable Accuracy	0.001°(optical rotation)0.01°Z(sugar)	0.002°(optical rotation)
Repeatability	≤0.002° (optical rotation)	≤0.01°(optical rotation)
Test Mode	Optical rotation, sugar degree	Optical rotation

Refractometer, Handheld

A special design concept for analog type measuring instruments. Various selections available based on features such as water resistant, ATC, heat resistant and milky sample. Body material selection available with Metal or Plastic.

Technical Specification

Parameter	Range
Category	Standard	Low-concentration	Heat Resistance
Suitable samples	Softdrink, Milk, Fruits, Vegetables, Kechup, Soysauce, Cutting oil,	Softdrink, Soup, Fruits, Vegetables, Cutting oil , Cleaning Agent etc	All samples
Brix, %	0-53	0-33/0-20/0-10	0-90

Refractometer, Salt

It is widely used in various industries for food and industrial solutions. For food products, in addition to checking salt content, salt meter is used to make sure salt is properly added and not forgotten for such product as bread, rice balls and frozen.

Technical Specification

Parameter	Range
Scale	Salt concentration (g/100g)
Measurement	0.00 to 10.0% (g/100g)
Resolution	0.01% for salt concentration of 0.00 to 2.99% 0.1% for salt concentration of 3.0 to 10.0%
Accuracy	Displayed value ±0.05% (for salt concentration of 0.00 to 0.99%) Relative precision ±5% (for salt concentration of 1.00 to 10.0%)

Refractometer, Abbe, Traditional

This model features a brighter field of view making it easier to measure inhomogeneous and/or dark samples. By very simple operation that needs only to set the boundary line of refraction at the cross hairs, this refractometer directly indicates a measured value in refractive index or Brix (%).

Technical Specification

Parameter	Range
Refractive index (nD)	1.3000 to 1.7100
Brix	0.0 to 100.0%
Refractive Index Accuracy (nD)	±0.0002
Brix Accuracy	±0.1%
Temperature	5 to 50°C
Light Source	LED

Refractometer, Abbe, Multi-Wavelength

Refractive index or Abbe number (νd or νe) can be measured at different wavelengths ranging from 450 to 1,100nm. The digitally displays measurement result of refractive index or Abbe number on the LCD. Measurement can be achieved by matching the boundary line with the intersection point of the cross hairs.

Technical Specification

Parameter	Range
Scale	Refractive index , Abbe number
Wavelength 450nm	Refractive index 1.3278 to 1.7379
Wavelength 589nm	Refractive index 1.3000 to 1.7100
Wavelength 680nm	Refractive index 1.2912 to 1.7011
Wavelength 1100nm	Refractive index 1.2743 to 1.6840
Accuracy	Refractive index : ±0.0002
Display Panel	LCD

Refractometer, Digital

The most accurate refractometer in the world is now even more stylish, smart, and functional,featuring intuitive touch screen technology. Provided with various pre-programmed special scales such as glucose, fructose, inverted sugar, honey moisture, urea, urine S.G. etc.

Technical Specification

Parameter	Range
Refractive index (nD)	1.324200 to 1.580000
Brix	0.00 to 100.00%
Refractive index (nD) resolution / accuracy	0.000001/  ±0.000040
Brix, resolution / accuracy	0.01%  / ±0.03%
Temperature control	5.00 to 75.00°C

Refrigerator, Blood Bank

High-accuracy computer-controlled temperature system with original binding can maintain the temperature constancy in the box at 4±1°C precisely. The temperature set-value can be adjusted at 2°C~6°C, and the temperature display precision is 0.1°C, the resolution is 0.1°C and the adjusting increment is 0.1°C.

Technical Specification

Parameter	Range
Volume, Litres	120	170	210	255	300	340
Blood Bag, 200ml/b	50	120	160	225	250	280
Layers	4	5	5	5	6	6

Parameter	Range
Volume, Litres	400	560	600	800	950	1380
Blood Bag, 200ml/b	300	430	450	580	650	850
Layers	5	5	5	5	5	6

Refrigerator, Laboratory Pharmacy / Medical

Laboratory Refrigerators are provided with forced air cooled, fin evaporator with fan to provide accuracy and more uniformity temperature without frost. Quality hermetically sealed compressor, noise between 40~50dB. Precise temperature control 0 ~ 15°C, factory setting 2~8°C, temperature accuracy 1°C, display accuracy 0.1°C. Visual & sound alarm system to avoid any problem on temperature controlling. Multi-door also available.

Technical Specification

Parameter	Range
Capacity, Litres	60	100	130	160	268	360	450
Cooled type	Air Cooled
Temperature range	2 – 8 degree C
Temp. accuracy	±1°C
Display accuracy	±0.1°C
Controller	Digital
Refrigerant	CFC – Free

Refrigerator, Laboratory – Combined with Freezer

The freezer is equipped with micro-computer control, and refrigerated and frozen temperature can be display at the same time. The temperature in the refrigerating chamber can be adjusted from 2℃ to 8℃, freezing chamber temperature:-15~-26℃. Provided with security control system.

Technical Specification

Parameter	Range
Total Capacity, Litres	265	450
Freezer Capacity, Litres	126	240
Refrigerator Capacity, Litres	158	210
Controller	Microprocessor
External material	Painted steel board	Galvanized steel

ROCKER

Rocker, Labscale, Digital

Variable speed rockers with large platform are ideal for gentle mixing. Provided with LED display with speed and time controlled via an easy-to-use encoder control knob.  Can be used at 4 to 40 °C (80% relative humidity, non-condensing), in an incubator or cold room. Continuous or timer operation with integral digital timer 1 s to 90 min or from 1 min to 9 h, with automatic switch-off.

Technical Specification

Parameter	Range
Shaking motion	3D gyratory	See-saw (rocking)
Angle	3 – 12° (adjustable)	7° (fixed)
Speed range (min-1)	5 – 70
Tier height	125 mm per tier
Max. load	10 kg
Input Power	50W

Roller

Solidly constructed roller shakers are ideal for mixing blood samples, viscous substances, and liquid-solid suspensions where minimum aeration is required. Select shakers with six or nine tube rollers to mix multiple samples at the same time while saving benchtop space.

Technical Specification

Parameter	Range
Type	Variable Speed	Fixed Speed
Max. Speed, rpm	60	33
Number of rollers	6 / 9	6 / 9
Display Type	Digital	Analog

Rotator, Fixed Speed

Ideal for keeping biological samples in suspension e.g. blood. The rotator can be used in incubators up to 60ºC and in cold rooms down to 4ºC. The rotator has a constant speed of 20rpm and the angle of rotation is fully adjustable, from horizontal for minimal mixing to vertical for full end-over-end mixing. Choice of six types available.

Technical Specification

Parameter	Range
Speed	Fixed to 20rpm
Micro tube holder	Tube diameter:  10 – 11.5 mm , Max. tubes: 40
Test/blood tube holder	Tube diameter:   9 – 20 mm , Max. tubes: 20
50ml centrifuge tube holder	Tube diameter:   25 – 35 mm , Max. tubes: 12
Culture tube holder	Tube diameter: 12/16/26 mm Max. tubes: 63/36/30

Rotary Evaporator, Basic

Rotary Evaporator is a specialized apparatus crafted specifically for purification and distillation experiments. Double sealing rings with Teflon and Viton makes vacuum up to -0.098Mpa. Intelligent temperature control and digital temperature display.  High evaporating and recovery collecting rate. Overloading protect function. Expandable module design. Stepless speed controller.

Technical Specification

Parameter	Range
Rotating Speed	0~200rpm
Vacuum	-0.098Mpa
Water Evaporating Speed	20ml/min
Rotary /  Collecting	1L24# (std size) /  1L35# (ball mill mouth)

Rotary Evaporator, Advanced

Rotary Evaporator provided with Evaporating flask with an ejector, convenient to remove. Includes 5L water and oil bath dual-purpose heating pot, heating temperature can reach 180°C, easy to switch between water and oil bath heating modes.

Technical Specification

Parameter	Range
Evaporating Flask	1L(NS 29/32)
Receiving Flask	1L(KS 35/20)
Rotating Speed	20~280rpm
Timing Range	1~999min
Stroke Height	150 mm

Orbital Shaker

Orbital Shaker is a high speed shaker with direct brushless DC motor and microprocessor controlled technique. It can be applicable in different laboratories: in microbiology, biotechnology, medical analysis, etc. LCD displays time and shaking speed. Warm root and variety of platforms can be chosen. When time control ends, instrument will make alarm voice.

Technical Specification

Parameter	Range
Time range	1min~99h59min
Speed range	50~300rpm
Orbit	10 mm
Power	50W
Max.load capacity	2.5 kg

Shaking Water Bath

Microprocessor controller with LED display and high precision of controlling temperature. Advanced multipurpose stainless steel spring clip. Timer ranging from 0 – 120 minutes. Shaking modes available are rotation oscillation and continuous.

Technical Specification

Parameter	Range
Oscillation Amplitude	30 mm	24 mm
Rotary Speed	60〜280rpm	50~280rpm
Shaking Mode	Rotation oscillation, continuous	Rotation oscillation & reciprocating, continuous
Consumption	1500w	1550w
Temp. Range	RT~100°C	RT~100°C

Sieve Shaker

Electromagnetic sieve shaker is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. It is particularly designed for test sieves with a diameter of 200 mm x 50mm h.

Technical Specification

Parameter	Range
Operation mode	Intermittent and Continuous Shifting Motion
Capacity	Up to 8 Sieves (Test Sieve Dia. form 200mm x 50mm h)
Shake time	Programmable Shake Time from 1min to 99min
Noise	Very Low Noise Operation
Power level	Programmable (from 1 to 20)

SOXHLET EXTRACTION APPARATUS

Soxhlet Extraction Apparatus, Single Position

Soxhlet Extractor is equipment, which is used in chemical analysis laboratory for extraction of lipid from solid test material such as grain, food, oil, bio fuel and wastes etc. These extraction units are one of important pieces of laboratory apparatus that are used to remove an excessive amount of liquids or solids from samples. The samples are placed in the extractor and cleaned by refluxing solvent.

Technical Specification

Parameter	Range
Flask Capacity	125ml	250ml	500ml	1000ml
Flask shape	Round bottom used together with heating mantle
Flask Joint	24/29
Soxhlet extractor	235mm	255mm	290mm	330mm
Condenser length	300mm	300mm	330mm	360mm

Soxhlet Extraction Apparatus, Three Position

Soxhlet Extractor is equipment, which is used in chemical analysis laboratory for extraction of lipid from solid test material such as grain, food, oil, bio fuel and wastes etc. Electromantle Extraction Heater with three recesses has a built-in electronic controller and offers a choice of heater only or heater/stirrer combination.  Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching. Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support, while removing sparking associated with mechanical switching.

Technical Specification

Parameter	Range
Flask Capacity	100ml	250ml	500ml	1000ml
No. of Recesses	3
Power	180W	450W	600W	900W

Soxhlet Extraction Apparatus, Six Position

Soxhlet Extractor is equipment, which is used in chemical analysis laboratory for extraction of lipid from solid test material such as grain, food, oil, bio fuel and wastes etc. Electromantle Extraction Heater with six recesses has a built-in electronic controller and offers a choice of heater only or heater/stirrer combination.  Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching. Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support, while removing sparking associated with mechanical switching.

Technical Specification

Parameter	Range
Flask Capacity	100ml	250ml	500ml	1000ml
No. of Recesses	6
Power	420W	900W	1200W	1800W

PLANT GROWTH CHAMBER

Bench Top Plant Growth Chamber

It has stainless steel chamber and two doors, when the outer metallic door is opened there is inner glass door. Very good uniformity is achieved by forced air circulation. A PID temperature controller provides constant and accurate temperature. Inside power socket enable the use of the shaker rotator or other instrument inside.Safety devices such as Short circuit breaker, overheat protector refrigerator overload protector,sensor abnormality, over low protector are provided.

Technical Specification

Parameter	Range
Temp. range	10°C~70°C
Temp. Display	LED digital display actual and setting temperature
Volume	150L / 175L x 2 / 80L
Temp. Accuracy /Uniformity	±0.1°C / ±1°C at 37°C

Plant Growth Chamber Incubator

Illuminated growth chamber controllers, allow setting of two temperatures conditions day & night &on&off illumination cycles relative to the program selected. Timers can be set to adjust cycles from 10 minutes upto 24 hours. Each system operates independently allowing for simulation of a cycle such as an eight hour day cycle of 30 deg C with light followed by a sixteen hour night cycle of 18degC without light. Forced air circulation ensures the most reproducible test conditions. The chamber air is gently & continuously circulated at a rate that ensures temperature uniformity of all test samples. The unit is equipped with a hermetically sealed compressor & an independent over temperature safety controller. It also includes circuit breaker to protect from electrical overload, 5 shelves, adjustable levelling feet, steel exterior with welded seams & corners, & double coated baked enamel finish.

Technical Specification

Parameter	Range
Temp. range	0°C~60°C
Temp. control	PID temperature controller
Volume	150L / 175L x 2 / 80L
Touch setting	Power, cooling temperature, humidity, illumination timer device.
Volume	320 L / 400 L / 550L / 1010L
Timer	24H Temperature and light control
Safety device	Overheat and over low cut off device, 2-stage protection with safety protection alarm and indicator, compressor delay-start, high and low pressure of cold media protection device.

TISSUE PROCESSORS

Tissue Processor, Automatic

Microprocessor based automatic tissue processors with large graphic display and multiple program memory.  Multi-programmable with up-to 20 programs can be stored in memory. Silent and Smooth operation. Agitation through rotor for better processing

Technical Specification

Parameter	Range
Tissue Processing Capacity	35 Cassettes	70 Cassettes	80 Cassettes	160 Cassettes
Paraffin Temperature Range	ambient to 80 deg C
Reagent Station Capacity	1 L
Nos. of beakers	10

Tissue Slide Stainer

Tissue Slide Staining Machines not only provides high degree of flexibility and high specimen throughput in histopathology laboratories but also maintains maximum quality and safety. Touch Screen LCD with user friendly software. Reagent stations are covered when not active to avoid exposure to fumes and minimize reagent loss. The work area is enclosed inside a fume hood to avoid exposure to the user. A built-in fan with charcoal filter safely disposes off the fumes at the back of the equipment, away from the user.

Technical Specification

Parameter	Range
Staining Capacity	up to 72 slides per load
Programmable	up-to 15 programs
Staining time for each station	1 sec to 59 min 59 secs
Capacity of Staining jars	1000ml
Nos. of reagent stations	12

Tube Furnace

Tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries. The solid double-layer metal frame is combined with the heat-insulating fan structure, and the furnace surface temperature is low. Horizontal use mode, upper opening structure, easy to operate.

Technical Specification

Parameter	Range
Tube size	Φ25 x 600mm	Φ40 x 1000mm	Φ80 x 1000mm	Φ100 x 1000mm
Max.  temperature	1200℃
Working temperature	1100℃
Heating element	HRE alloy resistance wire
Furnace tube material	Quartz tube

Ultrasonic Cleaner

Ultrasonic cleaning is a process that uses ultrasonic and an appropriate cleaning solvent to clean items. Fully microprocessor controller and programmable. Digital display, easy operation for time and temperature. Digital display, easy operation for time and temperature. Standard basket and lid.

Technical Specification

Parameter

Range

Ultrasonic Frequency: 40KHz
Capacity (L)	2	6	10	15	22	30
Heating Power (W)	200	400	400	600	800	1000
Time Range /Heating Temp	1~99min/20~80°C

Ultrasonic Cell Disruptor / Ultrasonic Homogenizer

Widely used in the field such as biology, chemistry, microbiology, pharmacology, physics, zoology, agronomy etc. LCD touch screen display. Storage capacity: 20 groups of program data. Temp, monitor: over-temperature protection. Other functions: automatic tracking the frequency, fault alarm.

Technical Specification

Parameter	Range
Frequency (KHz)	20 – 25			19.5 – 20.5
Crushing Capacity (ml)	0.1-300	0.1-500	0.1-700	1-1000	1-1500	1-2000
Standard Amplitude-change Pole 0 (mm)	6			20	22	25

UV Air Sterilizer (Mobile)

The UV Air Sterilizer is suitable for use in medical institutions, laboratory, production workshops with hygienic requirements. The sterilizer is suitable for use in medical institutions, laboratory, production workshops with hygienic requirements etc. Timing function of UV lamp cumulative use. Single chip microcomputer control, stable and reliable.Touch panel operation, convenient for man-machine interaction. High quality mirror plate is used to enhance the radiation intensity of ultraviolet lamp and improve the sterilization efficiency.

Technical Specification

Parameter	Range
Circulating Air	≥600m³/h	≥800m³/h
Noise	≤55dB
O₃ Residue	≤0.006mg/m3	≤0.007mg/m3
Ultraviolet Leakage	≤2μw/cm2	≤3μw/cm2
Temperature Range	5℃~40℃

UV Transilluminator

The function of the ultraviolet analyzer is to be used for fluorescence analysis: when a material molecule in the ground state is exposed to excitation. Equipped with a fixed camera port rack, the instrument is suitable for most SLR cameras on the market. With anti-ultraviolet observation window filter 99% ultraviolet, real-time observation of the sample situation.

Technical Specification

Parameter	Range
UV Lamp	6W
Reflection Wavelength	254nm, 365nm
Transmission Wavelength	302nm
UV Intensity	Ultraviolet intensity of 20cm away from the sample reaches 20pW/cm
Visible Light	60W

Vacuum Filtration Unit, Single unit

Filtration unit system is supplied with vacuum pump, filtration set and 1 m silicone tube. These pumps are driven by piston that needs no lubricant, making them maintenance-free and oil-mist-free. Bottles are equipped with patented magnetic filter holders. Its strong magnetic seal enables one-hand and clamp-free operation. It can drain the filtrate away directly without disassembly.

Technical Specification

Parameter	Range
Max. power:	60W
Max. current	0.3A
Max. vacuum	99 mbar abs.
Max. flow rate	20 L/min
Motor rotation speed	1450 RPM
Horse power	1/8 HP
Hose barb	ID8 (5/16 inch)
Vacuum Regulator	Yes

Vacuum Filtration System

Vacuum Filtration System with three place manifold is used for microbiological filtration is a perfect kit for microbiological tests with large number samples. All wetted parts of manifold are made of SS316 stainless steel, which can be fast sterilized by flame.  Each component can be easily removed for cleaning and autoclaving. Unique adjustable vent valve design eliminates water hammer phenomenon and helps drain residual liquid in pipe. Detachable hose barb can be connected to either side of the manifold quickly towards the vacuum source.

Technical Specification

Parameter	Range
Number of branch	3	6
Maximum Power	80W
Maximum vacuum	99 mbar abs
Maximum flow rate	34 L/min
Vacuum regulator	Yes
Filter Diameter	47 mm

Vacuum Pump

Oil-free pumps are compact in size, light in weight and oil-mist-free, making them the best pal in laboratory. Equipped with vacuum gauge and regulator for vacuum monitoring and adjustment. All oil-free pumps are equipped with overheat protection device that shuts down when overheated and resumes once cooled down, making the pumps safer and long-lasting. Filter cartridge at air inlet filters particles and moisture, which prevents pumps from damage.

Technical Specification

Parameter	Range
Max. fl­ow rate	90 L/min	100 L/min
Maximum Vacuum	85 mbar abs.
Maximum current	1.2A
Hose barb	ID8	ID20

Oven, Vacuum

Vacuum ovens are very versatile pieces of equipment with applications in laboratory research, engineering, and industry.Vacuum oven is generally used for drying of substances which are hygroscopic and heat sensitive and is based on the principle of creating a vacuum to decrease the chamber pressure below the vapour pressure of the water causing it to boil.The materials to be dried are kept on trays and pressure is reduced by means of vacuum pump. Steam is passed through the space between trays and jacket, so that heat transfer occurs by conduction.

Technical Specification

Parameter	Range
Temperature Range	RT+10°C to 200°C
Display Resolution	0.1°C
Temperature Stability	±1°C
Vacuum Degree	133 Pa
Ambient Temperature	+5~40°C

Vacuum Pycnometer

Vacuum Pycnometer is a large capacity unit with 10 L capacity. Designed with strong, rugged-duty vibrator and sturdy base with integral, heavy-duty on/off switches. Features domed transparent cover for easy observation of sample being tested. Equipped with quick-release cam/lock fasteners for quick placement and removal of canister. Heavy duty vibrating table keeps sample material loose for more reliable test results.

Technical Specification

Parameter	Range
Capacity	10 L
Sample’s maximum aggregate size	50 mm
Water inlet valve Hose	1/ 4 inches ID (inner diameter)
Vacuum hose and aspirator	3/8 inches NPT fitting
Flange	273 mm outer diameter
Maximum clearance above plate	197 mm
Dimension	240 × 311 mm
Gross weight	5.4 kg

Viscometer, Digital

Digital Viscometer is an important physical parameter to measure the resistance of liquids to flow. The measurement of viscosity is closely related to the fields of petroleum, chemical, electric power, textile, metallurgy, and national defense. It is used for industrial process control, improving product quality, and saving and developing energy. Important means. In scientific fields such as physical chemistry and fluid mechanics, viscosity measurement plays an important role in understanding fluid properties and studying flow conditions.

Technical Specification

Parameter	Range
Measuring Range（mPa·s）	40～40,000,000
Rotating Speed (RPM)	0.1 ～ 200 （Stepless Gear）
Accuracy	±1% full scale range in use
Repeatability	±0.5% full scale range in use
LCD screen display	The LCD screen can display the viscosity, speed, torque, spindle, temperature, spindle, shear rate, shear force and the maximum viscosity can be measured in the current spindle speed value.

Vortex Mixer

Mixing speed can be selected from 200rpm for very gentle mixing to 2500rpm for vigorous agitation. Choose between ‘touch’ mode or continuous operation simply by pressing a button on the fascia. Robust die-cast body avoids unnecessary movement during use. The ergonomic low profile design makes everydayvortexing comfortable for the user. Integral retort rod fixing allows vessels to be secured above the vortex action for long-term mixing.

Technical Specification

Parameter	Range
Speed	200 to 2500 rpm
Orbit diameter, mm	4.2
Touch and continuous mode	Yes
Dimensions,  (w x d x h) , mm	135 x 215 x 78

Water Distillation Unit, Vertical type

High quality electronic grade quartz boiler ergonomic design together with minimum maintenance combine to provide a product that give reliable service for years. The water distillate obtained from quartz single distillation is better when compared with water distillate obtained from other type/method of Distillation, with utmost precaution this apparatus can be used for acids.

Technical Specification

Parameter	Range
Output, Litres/hr	1.0	2.0	2.5	3.0	4.0	5.0	10.0
Power required kW	1	1.5	1.75	2	3	4	8
Cooling water, Litres/hr	30	40	50	55	60	65	120
Distillate temp.	60° ± 5° c
pH	6.0 – 7.0
Conductivity	1.5 – 2.0

Water Distillation Unit, Automatic Cabinet

Water distillation units / stills are manufactured either from high-quality Borosilicate 3.3 Glass incorporating a high-quality double coil condenser and boiler system or Semiconductor Grade Quartz for the double coil condenser and boiler system, combined with a silica glass sheathed heating element which provides a high-quality pyrogen-free output with conductivity <0.4 µS/cm for Quartz distillation models.

Technical Specification

Parameter	Range
Output , Litres/ hr	2	4	8
Boiler and Condenser	Borosilicate
pH	5.0 – 6.0
Conductivity, µScm-1	1.0-2.0
Temperature	30 – 40°C
Power requirement, kW	1.5	3	6

Water Purification Unit

The systems produce ultrapure and pure water directly from tap water. It produces water with very low organic carbon (TOC) content meeting requirements of liquid chromatography methods. It can also be used for some microbiological and molecular biology applications. The system produces both ultrapure and pure water. Ultrapure (Grade 1) water is dispensed through the point-of-use filter on the front panel. Pure (Grade 2) water is dispensed directly from the storage tank.

Technical Specification

Parameter	Range
Water resistivity (Grade 1)	18.2 MΩ x cm
Water conductivity (Grade 1)	0.055 μS/cm
Water resistivity (Grade 2)	10 MΩ x cm
water conductivity (Grade 2)	0.1 μS/cm
Bacteria	< 0.01 CFU/ml
Particles > 0.22 μm	< 1/ml
TOC	< 5 ppb
Feed water pressure	0.5 – 5 bar
Feed water conductivity	< 1300 μS/cm